Black And White Model Photography Tips

best black and white pictures Black And White Model Photography Tips

best black and white pictures Black And White Model Photography Tips

20 black and white photography tips for monochrome fans
Black and white photography tips
Converting an image to black and white
If you dont have that function on your camera then dont worry carry on reading and youll see that there are plenty of other ways to get great black and
Black and white portrait tips 3201
Portrait photography tips and ideas78
Beautiful woman black and white photography woman black and white photography
5 elegant model photography setups tutorial
Black and white portrait of a young woman wearing a hat and glasses there is
Photographing agency models how to shoot body shots s critical
101 incomparable portrait photography tips and ideas for inspiration
Black and white portrait tips 3191
Post processing black and white photography tutorial by amy beth mcmaster
Bw portraits
B w experiment by pranav on flickr licensed cc by black and white photography
Dark eyes
Photo by taylor stevens
Low key photography anywhere flash tips
Portrait photography tips and ideas 7
Black and white boudoir photography

Black and White Photography Tip #1: Shoot in RAW.  Many times when I shoot for black and white, the photo just doesn’t turn out right when I finally review it on the computer.  By shooting in RAW, you’ll be able to change your mind later if the photo wasn’t as great in black and white as you’d hoped.

This is one mistake first-time black and white photographers often make. When you take a close-up shot of a penguin or a Dalmatian dog, the scarcity of colors may initially make it seem like an obvious candidate for the perfect black and white picture.

Until a few years ago Photoshop’s Channel Mixer was the preferred means of turning colour images monochrome, but now Adobe Camera Raw has more powerful tools (in the HSL/Grayscale tab) that allow you to adjust the brightness of eight individual colours that make up the image.

The complimentary and opposing colours that bring a colour image to life are all reduced to black and white or shades of grey in a monochrome image and you have to look for tonal contrast to make a shot stand out.

Tags: blackandwhite, blackandwhitephotography, monochromatic, monochrome, Tips

There are a lot of inviting scenes around you that are good candidates for a great black and white picture. You’ll pick them out more if you visualize them in the context of underexposure. By underexposing, you can push the colors to black, white and gray, and lead the viewer’s eye through the frame.

Yet, monochromatic photos eventually made a strong resurgence. That’s because, in many instances, these photos look even more captivating and stunning than their color equivalent. Color can be a distraction from the core story a photo tells us. Removing it helps draw the viewer’s focus on the subject and emotion of the image.

You cannot realize your full potential in modern black and white photography if you fail to harness the power of filters. Use the polarizer, for instance, to darken skies and create a dramatic ambiance. You can also use a split grade for similar purposes.

Black and white photos are at their most interesting when distinct textures and patterns dominate the image. Elements like trees, fences, roads, and people draw viewers into the photo and lead them to the subject matter.

Ivan, the photographer working for Moose, explains: “I do commercial work in the photo studio equipped with to notch Profoto light and virtually infinite supply of the light modifiers. However, when in a studio, time is money. The whole team is waiting for you: the models, MUA, and post-production. You must be as efficient as possible. Therefore, sometimes I rent the light equipment to practice on my own. Also, I’ve purchased some cheap stuff, reflectors and chroma key backdrops, and spend a day once in a while trying to reproduce the results on cheap.”

Black and white pictures have that old-fashioned feel so work best with rustic subjects such as old fences and rundown farm equipment. A portrait of an elderly person showing the creases and lines on their aging face has a greater visual impact in black and white than in color.

When composing your photo frame in readiness for the shot, steer clear of large areas of white or black. Viewers often perceive these parts of the photo as dead spaces that are a distraction from the primary subject.

Pay attention to lenses and filters when choosing a camera. A good monochromatic photo heavily relies on sharp contrast and tonality. You’ll need a lens that can capture these attributes.

Flat light doesn’t have a large range of exposure so you are forced to examine the elements of the scene and focus on one or more deep tones that will grab viewers’ attention. It hides detail and skin imperfections which is one of the reasons flat light is widely used in beauty and fashion photography.

It is only when you reach for your editing tools that you start to realize that it wasn’t a good idea in the first place. As a general rule, scenes that have just 2 or 3 colors likely won’t look good when converted to a black and white picture.

Consistently seeing and thinking in black and white is a nagging problem for photographers. It’s understandable since, after all, we are surrounded by color at nearly every moment of our lives.

And adjusting the brightness of a red or pink shirt with the red sliding control, for instance, will have an impact on the model’s skin, especially the lips.

There isn’t a perfect choice when it comes to cameras; it depends on personal preference and intended purpose. Hobbyists will probably be happy to settle for a decent phone camera. However, if you are going into black and white photography for professional reasons or are otherwise interested in commercial quality shots, you’ll require a higher end camera.

20 Black and White Photography Tips for Monochrome Fans August 25, 2017

In Landscape/Nature, Post-processing by Jim HarmerMay 11, 201141 Comments

Many cameras are also capable of producing decent in-camera monochrome images these days and it’s worth experimenting with image parameters (usually contrast, sharpness, filter effects and toning) to find a look that you like.

Thanks to digital technology, monochrome photography is easier today than ever before. Check out these six black and white photography tips for getting great results.

The blurring of the movement also adds textural contrast with any solid objects in the frame. If necessary, use a neutral density filter such as Lee Filters’ Big Stopper or Little Stopper to reduce exposure and extend shutter speed (by 10 and 4 stops respectively).

Black and White Photography Tip #2: Give your photo some Silver Effex. Silver Effex Pro 2 is a Photoshop or Lightroom plugin that does one thing–make black and white photos look incredible.  In theory, you could replicate everything that Silver Effex Pro 2 does using Photoshop, but I have to confess that I have never been able to do it.  Black and whites look absolutely stunning in Silver Effex Pro 2.  The program is a bit pricey, but it is worth the money if you love black and white.  In fact, when I look at black and white produced by other photographers, I like to think I can tell if Silver Effex Pro 2 was used on the image.  Check it out here.

One way to avoid dead spaces is to use the rule of thirds. Divide the photo frame into horizontal and vertical thirds. As opposed to having the desired subject at the center of the photo, place it at the intersection of any two of these dividing lines.

Where appropriate, arrange the objects in a way that brings out the most outstanding attribute of the different subjects. Patterns are particularly interesting because of their orderly repetition. You can see patterns in a wide range of everyday scenes including parking lots and rows of bushes.

Long exposure shots can work really well in monochrome photography, especially where there’s moving water or clouds.

Black and White Photography Tip #15: HSL is the secret sauce. The last black-and-white tip is probably the most important.  When post-processing a black and white, you absolutely MUST tweak the colors in the HSL panel in Photoshop or Lightroom.  An exact tutorial on how to do this would be a blog post of its own, but your black and whites will look TEN TIMES better with an HSL adjustment.

Recommended Gear Photo Spots App IP Youtube Channel Beginner Tutorial Conference Premium Tutorials

Black and White Photography Tip #12: B&W isn’t a replacement for bad lighting, but it can soften the blow. The photo of the deer on this page is an example of a photo that looked terrible in color, but which looks nice in black and white.  I shot the photo at high-noon.  Because I used a polarizer, I was able to cut out the reflections on the leaves and mask the fact that it was shot in terrible light.

There’s no magic workflow of a template that will work for every black and white image. Varying black and white depth, and shades of gray means you cannot apply the same technique to all black and white photographs. How you treat landscape photos isn’t the same as how you’ll handle landscape pictures.

Understanding the core principles of good photography is fundamental but shouldn’t stifle your own creativity and style. You’ll likely develop an over-arching technique to your black and white photos which may vary slightly from one photo to the next depending on the picture’s subject.

Black and White Photography Tip #6: Find a wide range of grays. Having white and black in the image will help add interest to a picture, but if other areas do not have a wide range of varying tones of gray, the photo will most likely look dull.  You can achieve a a wider range of grays by using flash to throw highlights and shadows over certain areas of the photo.

This is one of the core principles of black and white art i.e. deepening the dark hues so whites and lighter colors appear strikingly brighter. It’s a play on human perception where the sight of dark tones creates the impression that every other element in the scene has to be brighter.

For nearly two decades, digital cameras replaced film cameras and dominated the photography industry. With the advent of affordable smartphones and tablets featuring increasingly good quality inbuilt cameras, many enthusiasts have found a convenient tool for their photography hobby.

Naturally, when exposures extend beyond about 1/60 sec a tripod is required to keep the camera still and avoid blurring. It’s also advisable to use a remote release and mirror lock-up to minimise vibration and produce super-sharp images.

Powerful photos are an aggregation of small subtleties. Take your photograph through Adobe Photoshop where you can make small tweaks that would be impossible to do using your camera. The tiny changes may include darkening a specific cloud, making whites sharper or changing the tone of a rock surface.

Black and White Photography Tip #7: Use a polarizer. When shooting around reflective surfaces such as water or leaves, use a polarizer to cut the reflections of the sun’s light.  When color is removed from the photo, these specular highlights can be distracting the overall composition.

It’s not always possible to redeem a photo shot in bad lighting. Black and white can, however, give you an opportunity to do that. Color photos that may seem to be a disaster due to terrible lighting can be saved to some extent with the use of a polarizer. For example, you can eliminate the reflection on the leaves in your picture.

Don’t be afraid to use a ND grad with a standard neural density filter if the sky is brighter than the foreground in a long exposure shot.

Black and white photos can deliver a strong image that would otherwise look weak and average in color. Qualities like shadow, light, texture, and pattern are accentuated in breathtaking fashion when the attachment of color is eliminated.

Part of Google’s Nik Collection photo editing suite, Silver Efex Pro is an Adobe Photoshop plugin that makes black and white images look breathtaking. In theory, you can use Photoshop to do all that Silver Efex Pro does; it’ll just be more difficult and manual.

When colored photos became the norm, black and white photography was initially considered bland and old-fashioned. After all, why would one limit themselves to varying shades of gray when they had the entire color spectrum at their disposal?

Plus, because you can set the opacity of the tools, you can build up their effect gradually so the impact is subtle and there are no hard edges.

There will be times when after shooting a photo in black and white, the final product doesn’t turn out as well as you thought it would. For some photos, color is essential. By shooting it in RAW, you’ll have the opportunity to revert to color if the monochromatic image isn’t up to the expected standard.

Black and White Photography Tip #4: Pay special attention to noise. With the outstanding low light performance of modern DSLR cameras, in addition to the noise removal programs at our disposal, photographers are used to getting away with noise.

It’s a great way of giving a sense of greater sharpness and enhancing texture.

1 Black and White Photography2 Black and White Photography Tips2.1 Watch Black and White Movies2.2 Choose the Right Equipment2.3 Where’s the Light?2.4 Experiment with Flat Light2.5 The Deeper the Black, the Brighter the White2.

6 Have Some Clean Black and Clean White2.7 Use Exposure to Visualize Black and White2.8 Use Filters2.9 Curves and Levels2.10 Choose a Suitable Subject2.11 Shape and Form2.12 Contrast2.13 Beware of Dead Spaces2.

14 Shoot RAW2.15 Silver Efex Pro2.16 Black and White Can Mitigate Bad Lighting2.17 The More Colors, the Better the Black and White Picture2.18 Connect with the Audience2.19 Find Your Space2.20 Practice, Practice, Practice3 Conclusion

You can also take a journey through time by visiting a local bookstore or library to discover the works of past photographers. One artist you may want to pay special attention to is Ansel Adams. His approach was so refined that he’s considered one of the best photographers of all time. Other notable black and white picture artists are Arnold Newman, Duane Michals, Vivian Meier, David Bailey, Paolo Reversi, Hiroshi Sugimoto and Jerry Uelsmann.

6 Black and White Photography Tips for Monochrome Enthusiasts

Finding your own style is never an overnight event. That wouldn’t be desirable even if it were possible. Taking your time allows you progressively develop depth and character.

However, it’s important to keep an eye on the whole image when adjusting a particular colour as subtle gradations can become unnatural looking.

About the author: Jeff Meyer is the editor of PhotoVenture, a photography blog for everything post-capture — improving photos, image management, sharing and more. This article originally appeared here.

Because compact system cameras and compact cameras show the scene seen by the sensor with camera settings applied, users of these cameras are able to preview the monochrome image in the electronic viewfinder or on rear screen before taking the shot.

Patiently learn the ropes as you work your way toward crafting a perfect image. Make slight changes to similar photos or frames. Don’t get too lost on one photo though. Adhere to a timeline by, for example, giving yourself no more than 5 minutes to edit each photo. If need be, you can come back to it days or weeks later to see if there’s anything you may have missed.

Black and White Photography Tip #5: Look for contrast. In my experience, the best black and white photos usually have some portion of the photo that is near to pure white, and some portion of the photo that is near black.  This increased contrast adds interest to the scene.

Fortunately, it’s possible to work adjust the brightness of these two colours separately to introduce some contrast. However, a good starting point is to look for scenes with tonal contrast.

When you get rid of color from an image, you can no longer use it to provide emphasis or make a certain scene the center of attention. Removing color eliminates one of the more distracting aspects of a photograph. When looking for a great black and white shot, ignore the colors and set your sights on the shapes.

Dodging and burning is a technique that comes from the traditional darkroom and is usually used to burn in or darken highlights and hold back (brighten) shadows.

Few things play as important a role in the quality of a photo as the light. To set the stage for an exceptional black and white picture, start with looking for finding and understanding the light.

This post is in response to a question from Matthew Tapley, who is interested in learning how to improve his black and white photography skills.  I hope this article has information that is valuable enough to you that you’d consider sharing it on Facebook or Twitter.

In black and white photography, there is no color to bring out the sharp contrasts of separate elements on your photo. You have to rely on shades of grey to portray the distinctions. Use contrast to elevate your main subject by, for instance, placing a light colored item in front of a dark background. This also allows you to add depth via a variety of shades and tones.

One thing you’ll notice about these 20 tips is the emphasis on a creative approach rather than camera techniques and settings. Black and white pictures require the same technical expertise as color photography. If you are already adept at taking color photos, you won’t have to significantly change the way you use your camera. What you’ll need to reevaluate is how you view the subject.

Love, hate, jealousy, admiration, depression, and elation were all narrated using light. If you are just getting started on black and white photography, these old movies are a quick way to understand what works and what doesn’t. Explore, learn and incorporate these techniques into your own photos.

In colour photography, for example, your eye would immediately be drawn to a red object on a green background, but in monochrome photography these two areas are likely to have the same brightness, so the image looks flat and dull straight from the camera.

This can be achieved by the light or by the brightness (or tone) of the objects in the scene as well as the exposure settings that you use. The brightness of the bark of a silver birch tree for example, could inject some contrast (and interest) in to a woodland scene.

Study the work of seasoned black and white photographers. Thanks to social media, many of them share their images on major platforms including Instagram, Facebook, and Flickr. Use hashtags such as #bwportraits, #bwphotography and #blackandwhitephotos to see the work of multiple photographers. Some of them respond to your questions and are ready to explain the idea behind the picture.

If you like these daily photography articles, you should LIKE us on Facebook, so they will appear in your facebook feed each morning.  Here’s a link to our facebook page.

There are always exceptions, but as a general rule look for scenes that contain some strong blacks and whites.

This means that you can use the Burn tool to darken highlights when they are too bright, or the Dodge tool to brighten them to increase local contrast.

Black and White Photography Tip #3: To visualize in black and white, only pay attention to lines, shadows, and shapes. This trick is very helpful to aid photographers in pre-visualizing a black and white image even though we live in a color world.

Black and White Photography Tip #11: Long exposures love black and white. I read this tip on the fantastic Digital Photography School website and decided to try it on an image that I took a few months ago.  I didn’t like the picture and had almost deleted it until I read that tip and applied black and white to the photo.

Your entire photograph doesn’t have to consist of black and white only. You’ll, however, want to have at least some elements in these colors. It helps anyone seeing the photo notice the image’s texture.

Photographers will use flat light to realize a near perfect image then add contrast during post-processing using dodge and burn, and other techniques.

Graduated neutral density (AKA ND grad) and polarizing filters are just as useful in monochrome photography as they are in colour. In fact, because they manipulate image contrast they are arguably more useful.

Black and White Photography Tip #13: Don’t get fooled. I confess to have made this mistake many times.  Sometimes I have shot a photo that includes very little color.  For example, a close-up of a penguin, or a night sky, or a dalmatian dog.  When I see these photos in Lightroom, I often reach for the black and white tools immediately, but I am always disappointed.  If the photo is practically colorblind to begin with, it probably won’t look as good in black and white as in color.

Whether you are a professional photographer or a hobbyist, black and white pictures are artistic, therapeutic and take you to new depths beyond the decorative role of color.

Thinking in black and white is crucial if you want to use filters successfully. It takes plenty of learning, practice, and failures to eventually get it right.

Flat light is the antithesis of directional light. It produces little to no contrast between shadows and highlights and is often viewed as making pictures appear boring, lifeless and dull. Yet, flat light can make for a pretty impressive black and white art.

The quality is striking to the extent that individuals who have used this plugin for a while can actually tell most times if Silver Efex Pro was employed in the production of black and white art. While Google ended support for it in May 2017, it’s still available.

During the exposure the highlights of the water, for example, are recorded across a wider area than they would with a short exposure and this can help enhance tonal contrast.

In a sense, black and white photography eliminates time from the equation. You can compare an image from the 1940s and one shot today without feeling a gulf in time except for changes in technology and style.

Black and White Photography Tip #9: Use the correct terminology: Black and white, monochrome, grayscale. “Monochrome” means that a color is placed on a neutral background.  Therefore, black and white images, which put black on a white background, are a type of monochrome image.  Grayscale is merely a way to show black and white images on a computer, which uses a reduced set of shades of gray.

The Levels and Curves controls can also be used to manipulate tonal range and contrast, but the HSL/Grayscale controls allow you to create separation between objects of the same brightness but with different colours.

If you’re relying on natural light, you’ll have to be patient sometimes and wait for the elements to align perfectly. When that moment arrives, take multiple shots. You won’t always know at the time which specific image was outstanding; it’ll only become apparent later on as you work on identifying the best one.

In black and white photography, success is contingent on paying great attention to tonality, lighting, composition, process, and equipment. Nevertheless, choosing the right gear and developing the necessary technique places you on the path to creating unforgettable monochromatic images.

DSLR users can also do this if they activate their camera’s live view system, but the usually slower responses mean that many will find it preferable or check the image on the screen post-capture.

An ND grad is helpful when you want to retain detail in a bright sky while a polarizing filter can be used to reduce reflections and boost contrast. Alternatively, consider taking two or more shots with different exposures to create a high dynamic range (HDR) composite.

Photoshop’s Dodge and Burn tools allow a level of control that film photographers could only dream of because you can target the highlights, shadows or mid-tones with both.

Black and White Photography Tip #8: Watch for texture. As long as texture is not front-lit, it will show contrast in fine details, which makes it a compelling subject for black and white.  This is why black and white photos of old items such as barns or antiques are so compelling–they have a lot of weathered texture.

Many of the best black and white photos are a result of editing RAW files containing full color. Even when set to RAW, many camera models have a monochrome simulation mode that will give you an early indication of how the final black and white image will look like.

Black and white photographs are typically composed of a range of gray tones. A strictly black and white photograph is an exception. Yet, absolute colors are an important starting point in creating a memorable photo.

As many photographers struggle to visualise a scene in black and white, these monochrome modes are an invaluable tool that will help with composition and scene assessment.

Some photos lend themselves to color but are not as eye-catching in black and white. For instance, sunset photos depend on the color of the sky to deliver the required impact. It’s therefore difficult to have an impressive black and white image of the sunset. Colorful flowers and birds are other examples where shooting in color is the most feasible option.

Coloured filters, which are an essential tool for monochrome film photographers, can also be useful for manipulating contrast in digital images.

Although coloured filters can still be used to manipulate contrast when shooting digital black and white images, it’s more common to save this work until the processing stage.

The following are vital tips for creating memorable black and white photos.

Black and White Photography Tip #10: Look for patterns. Patterns are interesting because of their ordered repetition.  Color merely distracts us from giving the pattern our attention.  By using black and white, images of patterns are far more compelling.  Once you start looking for patterns to shoot in black and white, you’ll notice them everywhere: cars in a parking lot, the shoes of a wedding party standing in line, or a row of bushes.

They work by darkening objects of their opposite colour while lightening objects of their own. An orange filter, for example, will darken the blue of the sky while a green one will lighten foliage.

It’s possible to adjust one of these colours to make it anything from white to black with the sliding control.

When it was first introduced to the market, Silver Efex Pro was a fairly expensive program going for as much as $500. Google acquired it, slashed the price to $137 before eventually making it available for free. Since it doesn’t cost you anything, it’s always a good idea to tinker your images in Silver Efex Pro if you intend to shoot professional black and white pictures.

Your photo should make persons viewing it feel something. One of the best ways to do that is to identify scenes with moments that are alive and authentic. Look for that intersection of composition, light and a life micro-moment.

Early movies were produced in black and white. Many films from the 30s, 40s, and 50s are available on YouTube. Producers at the time didn’t have the luxury of using color to draw viewer’s attention. Instead, they had to rely on varying lighting and shades to get their message across.

Black and White Photography Tip #14: Shoot in HDR!!! I’m actually surprised how little attention is given to black and white HDRs on the web.  I am so convinced of the merit of the black and white HDR that I spent an entire chapter in my HDR eBook talking explaining how to do it.  HDR is great for black and white photography because it exaggerates the dynamic range and edges.  Nothing pops quite like a black and white HDR.

Setting the exposure for these brighter areas also makes the shadows darker, so the highlights stand out even more. Look for shapes, patterns and textures in a scene and move around to find the best composition.

Even when you think you have developed a signature style, there is no end to learning as a black and white photographer. Be your own harshest critic. Shoot half a dozen images every day. Even if you are not a full-time photographer, this is something you can schedule into your day since each photo will probably require only a couple of seconds.

The best monochrome conversions are made by editing raw files which have the full colour information, but if you shoot raw and JPEG files simultaneously and set the camera to its monochrome Picture Style/Picture Control/Film Simulation mode you get an indication of how the image will look in black and white.

Remember that not all light, especially natural light, is created equal in photography. As a general rule, avoid taking black and white shots when the sun is at its brightest. The excessive lighting obscures detail and washes out the images. You are more likely to have a beautiful photo early morning, late afternoon and on overcast days.

Black And White Model Photography Tips