Three Column Blogger

|

Black And White Prints London.

Look for Contrast, Shape and Texture. The complimentary and opposing colours that bring a colour image to life are all reduced to black and white or shades of grey in a monochrome image and you have to look for tonal contrast to make a shot stand out. In colour photography, for example, your eye would instantly be drawn to a red object on a green background, but in monochrome photography these two areas are likely to have the same brightness, so the image looks flat and dowdy straight from the camera. fortunately , it’s possible to work adjust the brightness of these two colours discretely to introduce some contrast. However, a great starting point is to look for scenes with tonal contrast. There are always exceptions, but as a general rule look for scenes that contain some forceful blacks and whites. This could be achieved by the light or by the brightness (or tone) of the objects in the scene as well as the exposure settings that you use. The brightness of the bark of a silver birch tree for example, could inject some contrast (and interest) in to a woodland scene. Setting the exposure for these brighter areas also makes the shadows darker, so the highlights stand out even more. Look for shapes, patterns and textures in a scene and move around to find the greatest composition.

Try Long Exposure. Long exposure shots could work really well in monochrome photography, especially where there’s moving water or clouds. During the exposure the highlights of the water, for example, are recorded across a wider area than they would with a short exposure and this should help enhance tonal contrast. The blurring of the movement also adds textural contrast with any solid objects in the frame. If required , use a neutral density filter such as Lee Filters’ Big Stopper or Little Stopper to decrease exposure and extend shutter speed (by 10 and 4 stops respectively). naturally , when exposures extend farther than respecting 1/60 sec a tripod is wanted to keep the camera still and avoid blurring. It’s also advisable to use a remote release and mirror lock-up to minimise vibration and produce super-sharp images.

Dodge and Burn. Dodging and burning is a mechanism that comes from the traditional darkroom and is usually used to burn in or darken highlights and hold back (brighten) shadows. Photoshop’s Dodge and Burn tools allow a level of control that film photographers should only ambition of because you should target the highlights, shadows or mid-tones with both. This means that you may use the Burn tool to darken highlights when they are too bright, or the Dodge tool to brighten them to grow local contrast. It’s a good avenue of sharing a sense of better sharpness and enhancing texture. Plus, because you should set the opacity of the tools, you can build up her effect gradually so the impact is subtle and there are no hard edges.

Use Filters. Graduated neutral density (AKA ND grad) and polarizing filters are purely as useful in monochrome photography as they are in colour. In fact, because they manipulate image contrast they are arguably more advantageous . An ND grad is helpful when you require to retain detail in a bright sky while a polarizing filter may be used to reduce reflections and boost contrast. Alternatively, appraise taking two or more shots with diverse exposures to create a high dynamic range (HDR) composite. Don’t be anxious to use a ND grad with a standard neural density filter if the sky is brighter than the foreground in a long exposure shot. Coloured filters, which are an essential tool for monochrome film photographers, should also be advantageous for manipulating contrast in digital images. They work by darkening objects of his opposite colour while lightening objects of his own. An orange filter, for example, will darken the blue of the sky while a green single will lighten foliage.

Shoot RAW + JPEG. The greatest monochrome conversions are attained by editing raw files which have the full colour information, but if you shoot raw and JPEG files simultaneously and set the camera to its monochrome photograph Style/Picture Control/Film Simulation mode you get an indication of how the image will look in black and white. As numerous photographers struggle to visualise a scene in black and white, these monochrome modes are an invaluable tool that will help with composition and scene assessment. most cameras are also capable of producing decent in-camera monochrome images these days and it’s worth experimenting with image parameters (usually contrast, sharpness, filter effects and toning) to find a look that you like. Because compact trait cameras and compact cameras show the scene seen by the sensor with camera settings applied, users of these cameras are able to preview the monochrome image in the electronic viewfinder or on rear screen before taking the shot. DSLR users may also do this if they kick in his camera’s live view mode , but the usually slower responses mean that numerous will find it preferable or check the image on the screen post-capture.

Take Control. Although coloured filters can still be used to manipulate contrast when shooting digital black and white images, it’s more prominent to save this work until the processing stage. Until a a couple years ago Photoshop’s Channel Mixer was the favored means of turning colour images monochrome, but now Adobe Camera Raw has more forceful tools (in the HSL/Grayscale tab) that allow you to adjust the brightness of eight individual colours that make up the image. It’s possible to adjust single of these colours to make it anything from white to black with the sliding control. However, it’s important to keep an eye on the whole image when adjusting a particular colour as subtle gradations could become unnatural looking. And adjusting the brightness of a red or rosy shirt with the red sliding control, for moment , will have an impact on the model’s skin, especially the lips. The Levels and Curves controls could also be used to manipulate tonal range and contrast, but the HSL/Grayscale controls allow you to create discrimination between objects of the same brightness but with varied colours.