How To Colorize A Black And White Photo In Pixlr

November 19, 2018 6:40 am by columnblogger
How to colorize a black and white photo in photoshop hindi urdu
How to colorize an old black and white photo in photoshop
How To Colorize A Black And White Photo In Pixlr

4. To become a pro at this, you’ll want to experiment with tolerance and brush sizes, but even if you’re not a pro, use your always-handy undo functionality when you need it. With a little experimentation, my final product came out great:

You will see a little brush appear in the check box. This little brush will allow you to use “Snapshot 2” as a source to draw on “Snapshot 3”. It basically means you can use Snapshot2’s setting to color part of the “Snapshot 3”.

From some readers’ feed back, I am aware that some of them have problem with the step 7. When they tried to adjust the brightness and contrast of the “Cyan” Channel, they pressed icon in the “Adjustments” panel and a window like the second picture showed up. After they adjusted the parameter, the picture became the same as shown in the third figure.  The photo showed a lot brighter but there was no change in the color. Explanation: The function in the “Adjustment” panel works for all the channels here. When you adjust the Brightness/Contrast through the function in the “Adjustment” panel, you are basically changing the brightness and contrast of the black and white photo rather than the Cyan Layer.  Only by changing the the intensity of the Channel components can we produce a new color other than black and white.Solution: To solve this problem, just follow the instruction in the step 7 : Go to the menu on the top.  Choose Image=>Adjustments=> Brightness/Contrast.  This function only works for the current Channel.

Fix It! ContestMetalworking ContestTiny Home Contest34 Discussions

Step 4: Press Ctrl + J to Make a Copy of the Original Photo.

Step 8: Take Snapshot Using the Same Method Described in Step 5.

Step 9: Click Color/ Balance in the “Adjustments” Panel and Set Parameters.

This image has a fairly clear area we want to color, but if you are working on a more detailed area, try starting with a large brush and working your way to a smaller brush to work on the edging.

The general idea is to double up your layers and then erase part of one layer so that the bottom layer shines through. First, open your image in Pixlr Editor. Then, duplicate the background layer, which you can do by right clicking on the layer itself in your Layers toolbar. Or, look for the Duplicate layer option in the Layers top menu.

Simply put, the tool will replace the original color with a color you choose. It samples the pixels of the color immediately under your cursor and applies changes that are similar to that color within the radius of your brushstroke. In this way, it ensures an even color change as you move your brush around because it is continuously sampling the area as you move your brush around.

Step 17: Open Hue/Saturation Window to Change Some Parameters.

Black and white was not just popular in the 19th and first half of the 20th century. There was no color film available for amature use until the early 1950s.

Step 19: Congratulations! You Have Finished Coloring This Black and White Photo!

When tinting, you can set up the style of the brush in the top brush panel. You are able to set the size, the opacity, and other properties of the brush, as shown in the second figure. Choose an appropriate brush when tinting. It may takes a few time for starters to successfully separate the background and the edge of the girl’s body. However, in the history panel, you are able to redo any previous actions. As a result, don’t worry about make mistakes. Just keep trying and it will be fine!

Step 6: Switch to “Channels” Panel and Select “Cyan” Channel.

I have Photoshop 6 (CC6) and experienced the same problem – the brush picks up the colors that are in the Foreground/Background color palette box, not the colors from the Shapshot. Did you ever figure this out? Did anyone else?

Now, you’re going to simply use the Eraser tool to erase the areas that you want to show up as color. You’ll be erasing the top (duplicate) layer in specific areas with the Eraser, and the Eraser works as a brush. So, choose the best brush tool for the job. If you need to do detail work, consider using a soft brush and increase the hardness. You can also create your own brush if you want.

Change “Cyan” to 100, “Magenta” to -100 and “Yellow” to 20. As shown in the third figure, the picture should be in pink. We are going to use this color to tint the background of the photo and the tips of the little girl.

An important detail to understand is that this tool will preserve the tone of the area you’re painting. Any color you change will not affect the midtones, shadows, or highlights. Consequently, as you paint you may notice that your highlights aren’t changing color. Not a problem. You can re-sample your replacement color at any time and paint over those highlights with an appropriate color — which will again preserve the tone of that specific area. It’s very easy to change the color of a flat area of color. It takes a little more skill to change a more complex area, but you can accomplish it by separately changing the midtones, shadows, and highlights in a careful way to ensure your color change looks very realistic.

Step 5: Take a Snapshot of the Current Layer by Pressing “Alt” + Clicking the Camera Icon in the History Panel.

3. Repeat as necessary. As you re-color, keep in mind that you can use the Alt key (Command on Mac) to bring up the eyedropper and choose another color. For flat areas of color, you may only need to do one clean swipe and change the color. For more complex images, you’ll need to resample highlight colors and shadows and even reflections as I have in my image. For my highlights, I sampled a bluish tone that I thought matched the strength of the highlights and painted my highlights blue. Worked like a charm. I did the same for a few shadow areas. For the reflection on my hand, I lowered the tolerance and eyeballed a shade of blue that seemed right.

If your “History” window does not show up, go to the menu “Window” => “History”. You will get a confirmation dialog window like in the second figure. Select “Merged Layers” from the drop-down window and click OK.A snapshot is part of the history palette. It is used to record the state of the document at a point in time. You’ll want to make a snapshot before you make major changes which you might not be sure about keeping so that you can go back to the snapshot of the .psd file at the point you “recorded” it.

Step 3: Convert the Image Mode to CMYK Color and Click OK to Confirm Conversion.

You will be given a Confirmation message as shown in the second figure. Just click “OK”.The CMYK color model in Adobe Photoshop refers to four color printing process, in which cyan, magenta, yellow and black inks are mixed to generate a range of colors. By modifying the intensity of these colors, we are able to create any color that we can use to color the photos.For more information about CMYK, you can view the following link.

“Bright/Contrast” window will show up like in the first figure. Adjust “Brightness” to 85 and “Contrast” to 25.Then if you select “CMYK” in “Channels” panel,The photo should look like the third figure.By doing this step, we created a color that we will use to tint little girls skin and skirt, which means you have completed a big process. Keep it up!

Step 15: Check the Checkbox Before “Snapshot4” and Use That As a Source to Tint Little Girl’s Hair.

Step 7: Go to Image => Adjustments => Brightness/Contrast to Set Up Brightness and Contrast.

That’s it. It’s quite easy once you know how it works. Basically, you create a color and black-and-white layer, stack the black-and-white layer on top, and erase the areas where you want color to shine through. Easy!

Hello all, is there someone that can give me advise… I have Photoshop 2014 and PS Elements 11. I don’t know what I’ve done but in both programs I can’t use my clone tool… when I try and click on what needs to be cloned I get a pic on top of another pic so every time I move the clone tool the top pic moves too. So my clone tool is more or less useless this way. Is there anyone that can tell me what I might of done to make it this way and is there anyone that can tell me how to fix it… Thank you so much in advance..

Next, simply use the Desaturate option in the Adjustments menu to turn your top (duplicate) layer into a black and white image.

Change “Cyan” to -80, “Magenta” to 85 and “Yellow” to -95 and the picture should be like the second figure. We are going to use this color to tint the girl’s hair later.

You will see a new layer is created on the “Layers” panel as shown in the figure.

Pro tip: Some people are more comfortable duplicating a layer and working on that layer when replacing a color. That way, if you mess up or aren’t happy with the end result, you can easily delete the new-color layer and try again.

There were no black and white photos in the early 19th century.

Pixlr Express has a Color Splash option that makes it easy to transform a photo into black and white with areas of color shining through, but you can do this in a more thorough and detailed way in Pixlr Editor. To distinguish between the two processes, we generally think of the more advanced Pixlr Editor process as one of “selective color” rather than “color splash.”

Change the Saturation to 30 and the color should be much deeper, as shown in the third figure. It is kind of difficult to explain what Hue/Saturation filter does. After I looked it up online, I got the following answer.The Hue filter lets you adjust the hue of an entire image. Hue is the color reflected from or transmitted through an object. It is measured as a location on the standard color wheel. A positive value indicates clockwise rotation, a negative value counter-clockwise rotation. Values range from -180 to +180.The Saturation filter, sometimes called chroma, deals with the strength or purity of a color. Saturation represents the amount of gray in proportion to the hue. Values range from -100 (percentage of desaturation, duller colors) to +100 (percentage of saturation increase).Source: you have reached this part, you are almost done! Let’s export our image file from Photoshop.

2. Adjust your tolerance if you think it’s necessary. Start painting the new color onto the area you want to see change by clicking and holding your mouse while you paint. Un-click when you are done painting or want to reposition your mouse.

These instructions will show you how to turn a boring black and white (B/W) photo into a vibrant colored photo using Adobe Photoshop.In these instructions, I am going to color a photo of a little girl, to show the basic steps and concepts of how to color a B/W photo. To color your own B/W photo, the concepts are the same, and it will not be a difficult task for you.Black and white photographs were popular in the early 19th century. It took about a half century for people to switch from B/W photos to color photos. As a result, there still exists lots of B/W photos in our lives. Even for a color photo, its color is going to fade as time goes on. However, the world cannot only be in black and white. Color can help to tell a story, and it can be used to communicate on an emotional level. As you can see from the Figure.1, the little girl looks cold and pale. However, it looks much different in Figure.2. The girl looks prettier and the scene feels warm. As a result, putting color on B/W photos is an important skill.Technical Ability Requirements: Coloring a photo doesn’t require a lot of skills. Even if you are a child, you are able to complete this task. However, it is better for the readers to know basic computer skills, like opening and saving files, and copying and pasting components. If you are familiar with Adobe’s graphic processor Photoshop 5 or 6, it will be very easy for you. Here I am assuming the readers have the basic computer skills like launching Photoshop software and creating a new project.Required Time: It usually takes 20 minutes for a starter to finish all the steps by following the instructions. As you get more familiar with it, it will not take longer than 10 minutes. But, the better you want your photo to be, the more time you should spend on it.Coloring photos could bring you a lot of fun to your daily life. Just imagine if you colored your grandma’s old photo and showed it to your family, how surprised and happy they would be. When other people know you are able to use Photoshop and handle some cool skills, they will be jealous. Furthermore, this practice may lead you to a new interest in working with images.List of Required Parts: 1. A black and white or faded photograph.     In this case, an example image is provided as shown in the first figure. 2. Adobe Photoshop CS6 or CS5 on a working computerList Required Tools: Because we are going to use Adobe Photoshop to do all work, it is necessary to have a copy of Adobe Photoshop. You can either buy a copy from the Adobe official website or download the trial version. A trial version gives you a limit of 30 days to experience this software. Adobe Photoshop CS6 and CS5 both work well for this instruction. If you only have an earlier version of Adobe Photoshop, like CS3 or CS4, theoretically they can work because the functions we are going to use are basic functions in Photoshop. However, if you use CS3 or CS4, the user interface would be very different from the later version. As a result, it will be a little difficult to follow the steps here and you may need to find those corresponding functions by yourself. Here is the link of the official website: system requirements of Adobe Photoshop CS6 are as following: Windows • Intel® Pentium® 4 or AMD Athlon® 64 processor • Microsoft® Windows® XP with Service Pack 3 orMicrosoft Windows 7 with Service Pack 1. Adobe® Creative Suite® 5.5 and CS6 applications also support Windows 8. See the CS6 FAQ for more information about Windows 8 support.* • 1 GB of RAM • 1 GB of available hard-disk space for installation; additional free space required during installation (cannot install on removable flash storage devices) • 1024 x 768 display (1280 x 800 recommended) with 16-bit color and 512 MB (1 GB recommended) of VRAM • OpenGL 2.0–capable system • DVD-ROM drive • This software doesn’t operate without activation. Broadband Internet connection and registration are required for software activation, validation of subscriptions, and access to online services. Phone activation is not available.You can get more information for system requirements from the official website:, Let’s Start our work!

This step is absolutely blurry for me! With what I should do? I just paintin red lines.. o.O

Step 13: Click the Check Box Before “Snapshot 2” and Select “Snapshot 3”.

6 People Made This Project!PatM22 made it!Jibran UllahK made it!AnargyaS made it!CarolTheArtist made it!saeedsama made it!edwardblack619 made it!

While you can read this article to get all the details down, we made a video tutorial for this that covers the same ground. So, if you prefer to watch a video, give this a look: 

Go to File => Save AsChoose the place you want to save the file to. Then in the drop-down list of “Format”, select the type of file you would like it to be. Finally, click “Save” and your hot fresh color photo is just coming out. 

Movies made in technicolor have kept their colour better than any other brand. Colour film has been available for a long time but it was just too expensive in the early days.

Take this bottle, for example. I want to change the color of the entire bottle from green to blue. The bottle is made of glass so it has highlights and shadows and even some reflection of green light onto my hand, but it’s still a pretty easy job to tackle.

Actually, i have color slides that my father took during WW2 in europe – he was a cannoneer and was in England a few months before D-Day, which he then was part of. His slides have maintained more color than i even thought possible considering the years that have passed. we just scanned them this past year and it’s pretty amazing. He also took BW while there but the slides are all color.

I got stuck on Step 13 where you’re to use Snapshot 2 as a source to draw on Snapshot 3. I tried multiple times but each time the brush automatically picked up the colors that were in my Foreground/Background color palette box, not the colors from the Snapshot. Any advice?

Maybe you want your photo of blueberries to become red berries. Maybe you want that photo of you as a teenager in your Sunday best to show you with a red scarf and not that ugly old brown one you can’t believe you wore back then. There are lots of reasons to change a color, and this is one of Pixlr Editor‘s most popular tools. It’s a powerful but often misunderstood tool. Hopefully, we can clear up any confusion.

That is amazing! I had no idea color film was available that early. Perhaps it was available, but somewhat expensive for the general population? Thanks for that information.

1. Select the color replace tool from the toolbar and mouse over your image. You’ll see your brush, which you can resize if you want. You can use the color selector to pull up color palettes and choose a new color, or you can hold down the Alt key (Command key on Mac) to bring up the eyedropper and sample a color directly from your image.

What is really great about Pixlr’s color replace tool is that you can “color outside the lines” in a seemingly sloppy way with a large brush, but your new color will still be applied within the lines. How? It all depends on the tolerance level you choose. You can control how picky or particular this process is by altering the tolerance. Select a low tolerance for more detail-oriented work or to be picky about isolating a very specific color. Select a high tolerance for areas with shadows and texture that you want to paint ove more broadly.

Step 11: Open Color/Balance Window Again and Set New Parameters.

Congratulations! You have finished coloring the black and white photo, successfully made the little cute girl looks more lively lovable. You are free to share it with others!  It looks so much different from the original black and white photo even only three color are used. The light becomes brighter and the the eyes of little girl is shining. Even the smell of perfume seems to spread through the air. Colors makes the world better.Although it is an easy task, it should give you a basic concept of how to use Adobe Photoshop to color a photo. As time goes on, Photoshop is getting better and better. It keeps offering new functions to public by updating new versions. In the future, I am sure that there will be more convenient functions coming out for people to color black and white photos.

After dragging in the image, you should see a little girl lying on a bed playing with a bottle of perfume as is shown in the figure. As you can see, he picture looks boring and not so vivid. So far, you have made a good start. Let’s go a little bit further.

Step 16: Check the Checkbox Before “Snapshot3” and Use That As a Source to Tint Little Girl’s Tips and Cheeks.

Recommendation: Use small brush, for example size 20 and 70% Opacity, to tint girl’s tips. Use large brush like size 100 and 50% Opacity to powder the girl’s cheek. You can also adjust the properties of brush according to your opinion.

Related Images of How To Colorize A Black And White Photo In Pixlr
Colorizing black and white pictures
Color a black and white photo
Colorizing black and white photographs with photoshop
How to convert black and white photo to a color photo in photoshop
How to convert color photo to black and white in photoshop
Converting black and white photo to colour photo photoshop tutorial by tutsdaddy com youtube
Photoshop colorize
Black and white photoshop actions
Colorize a black and white image photoshop tutorial
Old photo colouring photoshop colorize
Ok after set color balance merge all layers now your black and white to color photo complete and save this
How to change a persons skin color from dark to light in photoshop
Colorize a black and white photo
Black and white image and the colorized version
Colorize or coloring old photos
Next we want to knock out the color in this layer choose adjustments desaturate and youll see that this will turn your layer into black and white
The original image in photoshop image licensed from istockphoto by photoshop essentials com
Convert black and white photo to color photoshop cs6 tutorial
Black And White Posters Fashion
Black And White Posters Fashion

Black And White Posters FashionBlack And White Posters Fashion Give us a call 800-952-5592 Live Chat Open Chat Window Send […]

Oversized Black And White Photography
Oversized Black And White Photography

Oversized Black And White PhotographyOversized Black And White Photography Image 0 An abstract modern art vast photo of the surreal […]

Colorizing Black And White Photos Wiki
Colorizing Black And White Photos Wiki

Colorizing Black And White Photos WikiColorizing Black And White Photos Wiki Since the late 1960s, few mainstream films have been […]

Black And White Portrait Lighting Tutorial
Black And White Portrait Lighting Tutorial

Black And White Portrait Lighting TutorialBlack And White Portrait Lighting Tutorial A small softbox, an umbrella or even a light […]

Black And White Photography Articles
Black And White Photography Articles

Black And White Photography ArticlesBlack And White Photography Articles Represent the world in black and white, as a world in […]

Black And White Portraits Girl
Black And White Portraits Girl

Black And White Portraits GirlBlack And White Portraits Girl Black And White Portraits GirlRelated Images of Black And White Portraits […]